Section 3 - Configuration
The Internet Connection Setup Wizard is designed to guide you
through a step-by-step process to configure the Internet and
wireless settings of your DIR-506L.
Click Next to continue.
Select an operating mode to use, then click Next to continue.
Note: When selecting Hotspot Mode or Repeater Mode, it may
take up to 30 seconds before the next screen appears.
If you selected Router Mode, select which type of Internet
connection you use, then click Next.
• DHCP is often used for cable modem and direct Internet
connections.
• PPPoE is used for most DSL connections. If you choose
PPPoE, enter the username and password for your
connection on the next screen.
• Static IP should only be used if instructed to by your
Internet service provider. Enter the IP information
provided to you by your ISP on the next screen.
D-Link DIR-506L User Manual
Internet Connection Setup Wizard
21