Printer Setup; Ethernet Parameters; Printer Parameters - Custom Engineering KUBE II ETH User Manual

PRINTER SETUP

Setup stampante
Drucker setup
PRINTER NAME and
FIRMWARE RELEASE
PRINTER STATUS

ETHERNET PARAMETERS

PRINTER PARAMETERS

KEYS FUNCTIONS
KUBE II ETH
PRINTER SETUP
PRINTER TYPE .............................Kube
PRINTING HEAD TYPE .................T80
INTERFACE ...................................ETHERNET
PROGRAM MEMORY TEST..........OK
DYNAMIC RAM TEST....................OK
EEPROM TEST..............................OK
CUTTER TEST...............................OK
HEAD VOLTAGE [ V]
HEAD TEMPERATURE [°C] = 24
POWER ON COUNTER
PAPER PRINTED [cm] = 262169740
CUT COUNTER
IP Address........................... : 192. 168. 10. 91
Subnet Mask ...................... : 255. 255. 240.
Default Gateway.................. : 192. 168.
MAC Address .................... : 00-0E-E2-00-00-00
For advanced printer setup please
connect to: http://192.168.10.91
Autofeed ....................................:
Print Mode .................................:
Chars / inch ...............................:
Speed / Quality..........................:
Printing Width ............................:
Notch Alignment ........................:
Notch Threshold ..................... :
Notch Distance ....................... :
Current ................................... :
Total Cut (ESC i)........................:
PaperEnd Buffer Clear ..............:
PowerFail WakeUp Mode..........:
Print Density..............................:
[LF] key to enter setup
[OnOff] key to skip setup
36
rel.1.00
= 24.34
= 256
= 13965351
0
0. 1
CR disabled
Normal
A=15 B=20 cpi
Normal
76mm[80 PaperW]
Disabled
2.00
0.00
Low
Enabled
Disabled
LAST PWR State
0%