Setting The Date And Time - Kodak EasyShare DX7590 User Manual

Setting the date and time

Setting the date & time, first time
The message Date and Time have been reset appears the first time you turn on
the camera or if the battery is removed for an extended time.
1 SET DATE & TIME is highlighted. Press the OK button.
2 Go to step 4 in
Setting the date & time, anytime
1 Turn on the camera. Press the Menu button.
2 Move the Joystick
OK button.
3 Move the Joystick
OK button.
4 Move the Joystick
Joystick
5 When finished, press the OK button.
6 Press the Menu button to exit the menu.
NOTE: Depending on your computer operating system, Kodak EasyShare software may update the
camera clock when you connect the camera. See the EasyShare software Help for details.
www.kodak.com/go/support
Setting the date & time,
to highlight Setup Menu
to highlight Date & Time
to adjust the date and time. Move the
to advance to the next setting.
anytime.
, then press the
, then press the
Getting started
5