Displaying Pictures And Videos On A Television - Kodak EasyShare DX7590 User Manual

Reviewing pictures and videos
Changing the slide show display interval
The default interval setting displays each picture for 5 seconds. You can
change the display interval from 3 seconds to 60 seconds.
1 On the Slide Show menu, move the Joystick
then press the OK button.
2 Select a display interval.
To scroll through the seconds quickly, hold the Joystick
3 Press the OK button.
The interval setting remains until you change it.
Running a continuous slide show loop
When you turn on Loop, the slide show is continuously repeated.
1 On the Slide Show menu, move the Joystick
press the OK button.
2 Move the Joystick
The slide show repeats until you press the OK button or until battery power is
exhausted.

Displaying pictures and videos on a television

You can display pictures and videos on a television, computer monitor, or any
device equipped with a video input. (Image quality on a television screen may
not be as good as on a computer monitor or when printed.)
NOTE: Ensure that the Video Out setting (NTSC or PAL) is correct (see
stops if you connect or disconnect the cable while the slide show is running.
1 Connect the audio/video cable (included) from the camera video-out port
to the television video-in port (yellow) and audio-in port (white). See your
television user's guide for details.
2 Review pictures and videos on the television.
42
to highlight On, then press the OK button.
www.kodak.com/go/support
to highlight Interval,
.
to highlight Loop, then
page 31). The slide show