If...
Flash does not fire
Storage location is
almost or entirely full
Battery life is short
You cannot take a
picture
Error message
appears on EVF/LCD
screen
Memory card not
recognized or camera
freezes with card.
www.kodak.com/go/support
Try one or more of the following
■
Open the flash unit
■
Check the flash setting and change as needed
■
Transfer pictures to the computer
■
Delete pictures from the card or insert a new one
■
Change image storage location to internal memory
(page
29).
■
Wipe the contacts with a clean, dry cloth
inserting a battery in the camera.
■
Insert a charged battery
■
Turn the camera off, then on again.
■
Depress shutter button all the way
■
Insert a charged battery
■
Wait until the AF/AE indicator turns green before attempting
to take another picture.
■
Memory full. Transfer pictures to the computer
delete pictures from the camera
image storage location, or insert a new card.
■
Turn the camera off.
■
Remove memory card from the camera.
■
Remove the battery and wipe the contacts with a clean, dry
cloth
(page
64).
■
Reinstall the battery.
■
Turn on the camera.
■
If all else fails, get customer support help (see
■
Card may be corrupted. Format card in camera (see
■
Use another memory card.
(page
20).
(page
(page
2).
(page
(page
2).
(page
Troubleshooting
(page
20).
51).
(page
7).
(page
64) before
8).
(page
51),
39) or card, change
page
60).
page
7).
55