Getting started
Changing the display, EVF or LCD
Your camera has an Electronic Viewfinder (EVF). The EVF, like the LCD (Liquid
Crystal Display) screen, displays what the camera captures.
EVF/LCD
toggle
button
NOTE: The EVF/LCD screen turns off after 1 minute if no pictures are taken. Press any button to
turn the display back on.
Using the diopter dial
You can adjust the EVF sharpness for your eyesight.
Diopter dial
EVF
Checking camera and picture status
The icons that appear on the EVF/LCD screen indicate the active camera and
picture settings.
6
Press the EVF/LCD toggle button to change
the screen from EVF to LCD, and back.
The selection remains until you press
the button again.
■
Look through the EVF.
Turn the Diopter dial until the viewfinder
■
image is sharp.
Press the Status
Status
off and on.
button
button to turn the icons
www.kodak.com/go/support