Kodak EasyShare DX7590 User Manual page 17

Using the auto-focus framing marks
When using the camera EVF/LCD screen as a viewfinder, framing marks
indicate where the camera is focusing. For the best pictures, the camera
attempts to focus on foreground subjects, even if the subjects are not centered
in the scene.
1 Press the Shutter button halfway and hold.
When the framing marks turn from blue to green, focus is accomplished.
While the shutter button is pressed halfway:
Framing marks
2 If the camera is not focusing on the desired subject (or if the framing marks
disappear), release the Shutter button and recompose the scene.
3 Press the Shutter button completely down to take the picture.
NOTE: Framing marks do not appear in Landscape or Video mode. When you use Focus
Zone (page 28) and set Center Zone, the framing marks are fixed at Center Wide.
www.kodak.com/go/support
Taking pictures and videos
Center focus
Center wide focus
Side focus
Center and side focus
Left and right focus
9