Troubleshooting
Computer/connectivity problems
If...
Computer does not
communicate with
the camera
Pictures do not
transfer to computer
Slide Show does not
run on an external
video device
Picture quality problems
If...
Picture is too dark
or underexposed
Picture is too light
56
Try one or more of the following
■
Turn on the camera.
■
Insert a charged battery
■
Make sure USB cable is securely connected on camera and
computer port
■
Make sure the EasyShare software is installed
■
Click the Help button in the EasyShare software.
■
Adjust the camera Video Out setting (NTSC or PAL,
page
31).
■
Make sure the external device settings are correct (see the
device's user's guide).
Try one or more of the following
■
Reposition camera for more available light.
■
Use Fill flash
(page
behind the subject.
■
Move so that the distance between you and the subject is
within the effective flash range
■
To automatically set exposure and focus, press the Shutter
button halfway and hold. When the AF/AE indicator turns
green, press the Shutter button completely down to take
the picture.
■
Use P mode to adjust the Exposure and Flash Compensations
(page
19).
■
Use P mode
(page
page
28).
■
Reposition camera to reduce the amount of available light.
■
Turn flash off
(page
■
Move so that the distance between you and the subject is
within the effective flash range
■
To automatically set exposure and focus, press the Shutter
button halfway and hold. When the AF/AE indicator turns
green, press the Shutter button completely down to take
the picture.
■
Use P mode to adjust the Exposure and Flash Compensations
(page
19).
(page
2).
(page
51).
20) or change your position so light is not
(page
19) and Selectable Zone (see Focus Zone on
20).
(page
www.kodak.com/go/support
(page
44).
20).
20).