GE zek957bdbb Owner's Manual page 34

How to
delay the
start of
cleaning
After a
You may notice some white ash in the oven.
clean cycle Wipe it up with a damp cloth after the
oven cools.
If white spots remain, remove them with
a soap-filled steel wool pad and rinse
thoroughly with a vinegar and water mixture.
These deposits are usually a salt residue that
cannot be removed by the clean cycle.
If the oven is not clean after one clean cycle,
repeat the cycle.
34
1 Press the SELF CLEAN pad.
2 Using the number pads, enter the desired
clean time.
3 Press the DELAY START pad.
4 Using the number pads, enter the time of
day you want the clean cycle to start.
5 Press the START pad.
The door locks automatically. The display will
show the start time. It will not be possible to
open the oven door until the temperature
drops below the lock temperature and the
LOCKED light goes off.
When the LOCKED light is off, open the door.
NOTE: On double oven models, you can set a delay
clean in both ovens at the same time. The second oven
set will automatically delay the start of cleaning until
the end of the first oven's clean cycle.
To recall the start time of the second oven set, press
the DELAY START pad on the controls for the
second oven.
Using the Self-Cleaning Oven
Wall Oven
• You cannot set the oven for cooking until the
oven is cool enough for the door to unlock.
• While the oven is self-cleaning, you can press
the CLOCK pad to display the time of day.
To return to the clean countdown, press the
COOK TIME pad.
• If the shelves become hard to slide, wipe the
shelf supports with cooking oil.