Advantech DVP-7010BE User Manual page 49

2.5.6 AdvDVP_Stop
Syntax
int AdvDVP_Stop(int nDevNum)
Parameters
nDevNum:
Return Value
SUCCEEDED:
FAILED:
SDKINITFAILED:
DEVICENUMERROR:
Description
This function stops video capturing on a specified
capture port. The capture state would be set as
"STOPPED" after a successful stop.
See Also
AdvDVP_Start
AdvDVP_GetCapState
Specifies the device number(0~3).
Function failed.
SDK not initialized.
Invalid device number.
- 49 -
Function succeeded.