Makita 2414NB Instruction Manual page 9

If you use a spacer block which is slightly
narrower than the workpiece as shown in
the figure, you can also utilize the wheel
economically
Diameter of
workpiece
Long workpieces must be supported by
blocks of non-flammable material on either
side so that
it
will be level with the base
top.
Switch action
To prevent the switch trigger from being
accidentally pulled, a lock-off button is pro-
vided as a safety feature.
To start the tool, press in the lock-off but-
ton and pull the switch trigger. Release the
switch trigger to stop.
CAUTION:
Width
of
spacer block
Switch trigger
Lock-off button
*Before plugging in the tool, always check to see that the switch trigger actuated properly
*When not using the tool, remove the lock-off button and store
it
in a secure place. This
and returns to the "OFF" position when released.
prevents unauthorized operation.
9