Download Print this page
Makita 2414DB Technical Information
Hide thumbs Also See for 2414DB:

Advertisement

T
ECHNICAL INFORMATION
Models No.
Description
C
ONCEPTION AND MAIN APPLICATIONS
Model 2414DB is the sister version of the existing
Model 2414NB .
Model 2414dB can be operated by AC or DC power source.
S
pecifications
Voltage (V)
120
No Load Speed
Wheel size
Net weight(with Abrasive Cut-off wheel) 16.4Kg(36.2lbs)
Cord length
Cutting capacities
Round stock
Cut-off
Angle
°
ø
90
115mm(4-1/2")
°
ø
45
115mm(4-1/2") 115x103mm(4-1/2"x4-1/16")
S
tandard equipment
Socket Wrench 17----- 1 pc.
Switch Button
---------- 2 pcs.
Cut-off Wheel 355mm
<Note>The standard equipment may differ from country to country.
F
eatures and benefits
1.Double insulated
2.See the sheets attached for more information.
2414DB
355mm(14")Portable Cu-off
Current (A)
Cycle (Hz)
15.0
50/60
3800rpm
Arbor diameter
25.4mm(1")
355mm(14")
Wheel diameter
Thickness
3mm(1/8")
2.5m(8.2ft)
Rectangular stock
a
b
a
102x194mm(4"x7-5/8")
70x233mm(2-3/4"x9-1/8")
280mm(11")
Continuous Rating (W)
Input
Output
1650
900
Square stock
b
a
119mmx119mm
(4-11/16"x4-11/16")
106mmx106mm
(4-3/16"x4-3/16")
.
New Tool
600mm(23-5/8")
500mm(19-3/4")
Max. Output(W)
2400
L-shape stock
a
t
b
137mmx137mmx10mm
(5-3/8"x5-3/8"x3/8")
100mmx100mmx10mm
(3-15/16"x3-15/16"x3/8")

Advertisement

loading

Summary of Contents for Makita 2414DB

  • Page 1 Description 355mm(14")Portable Cu-off ONCEPTION AND MAIN APPLICATIONS Model 2414DB is the sister version of the existing 600mm(23-5/8") Model 2414NB . Model 2414dB can be operated by AC or DC power source. 280mm(11") pecifications 500mm(19-3/4") Continuous Rating (W) Voltage (V) Current (A) Cycle (Hz) Max.
  • Page 2 Guide Plate for fixing workpiece can be adjusted at 3 different positions and at any angle from 90° to 45 ° omparison chart Model No. 2414DB 2414NB 355mm(14") Wheel diameter Current(A):At 120V No load speed(rpm) 3800 Round stock 115mm(4-1/2")
  • Page 3 EPAIR For repairing methods, proceed in the same orders as 2414B except for swinging function at support point of 2414B. 1.Disassembling of the handle and switch The handle R/L are fixed with 4 pieces of tappingscrews and are mounted on the gear housing withthe 3 pan head screws M5.
  • Page 4: Compression Spring

    3.Disassembling of the gear Unless the safety cover has been disconnected, the gear cannot be disassembled. To disconnect the safety cover, after removing the hexagon bolt M10x25, outer flange, wheel stone, O ring, Ring 17and inner flange, remove the pan head screws M6(4pieces) for mounting the safety cover.Pull out the spindle to disconnect the gear.The two faces on the gear are protected from turning.To assemble the gear, make fit of the two faces of gear and spindle.
  • Page 5 ircuit drawing The condenser and line filter are not used in some areas. Line filter Switch Power supply cord Support unit Condenser...

This manual is also suitable for:

2414nb