Table of Contents
Advertisement
10.The LED lights should light up after few seconds, and the IP camera will test its Pan/Tilt
motor within 1 minute (Do not disturb IP camera at this stage). Please refer to following
chapters for detailed operating instructions.
11.If it needs to set up wireless connection, please attach the wireless antenna to the IP
camera and configure through wired connection. Remove the network cable after finish all
relative wireless configuration then user can access the camera through wireless connection.
Please refer to the section 3 for detail configuration.
2.4 Initial Utility Installation
This chapter shows how to quick set up your IP Camera. The IP Camera is with the default
settings. However to help you find the networked IP Camera quickly the Windows utility
(PLANET IPFinder) can search the IP Cameras in the network that shall help you to configure
some basic setting before you start advanced management and monitoring.
Please insert the bundle CD disk into your CD/DVD-ROM drive. When the welcome web page
appears, please click your IP Camera name on the IP Camera list i.e. ICA-HM227W. Then
click on the utility IPFinder to start the program.
2.5 Preparation
You can use your new Network IP Camera by its web user interface via web browser. Currently
the viewing system requirement for Network IP camera is:
■
OS: Microsoft Windows 2000, 2003, 2008 server, XP, Vista, Win7
Browser: Mozilla Firefox, IE7 or above, Chrome, Safari
■
Cell phone: 3GPP player
■
Quick Time: 6.5 or above
■
The IP Camera will use DHCP server on your local network to obtain an IP address
automatically by default. So, you can check your DHCP server's IP address lease table to find
User's Manual of ICA‐HM227W
18
Advertisement
Table of Contents
