[Other Functions]; [Test Pattern]; [Lamp Runtime]; Input Select - Panasonic PT-AE8000U Operating Instructions Manual

[OTHER FUNCTIONS]

Press the <ENTER> button.
z The [OTHER FUNCTIONS] menu is displayed.
PICTURE
POSITION
LANGUAGE
3D SETTINGS
LENS CONTROL
OPTION
■ [FREEZE]
You can temporarily freeze the projected video
independently of external device playback.
Press the <ENTER> button.
z Pressing the <RETURN> button cancels the
function.
Note
z While displaying the frozen image, you can enter the
[AREA SELECT] mode of the [SPLIT ADJUST] menu
by pressing the <ENTER> button. However, when a 3D
signal is being input (including converting 2D to 3D),
transition to [SPLIT ADJUST] is not possible.
For details see [SPLIT ADJUST] in the [PICTURE] menu.

( page 44)
■ [BLANK]
When the projector is not being used for a brief period,
such as during a break in a meeting or during preparation
for a meeting, the video can be stopped temporarily.
Press the <ENTER> button.
z Press any button to escape from the blank mode.
■ [VIERA LINK]
You can operate an HDMI-connected device.
Press the <ENTER> button.
z The [VIERA LINK] menu is displayed.
[VIERA LINK
CONTROL]
[HOME THEATER
VOLUME]
[HOME THEATER
MUTE]
[OPERATE
OTHER DEVICE]
z For details, see "Using VIERA Link". (
Downloaded From projector-manual.com Panasonic Manuals
OTHER FUNCTIONS
FREEZE
BLANK
VIERA LINK

INPUT SELECT

HDMI1 IN
HDMI2 IN
HDMI3 IN
COMPUTER IN
COMPONENT IN
S-VIDEO IN
VIDEO IN
Selects the device to operate
and switches input
Adjusts the theater volume
Mutes the theater
Operates third-party device

page 96)
■ INPUT SELECT
The input can be switched directly.
HDMI signal from the device
[HDMI 1/2/3 IN] connected to
HDMI IN 1/HDMI IN 2/HDMI IN 3.
RGB signal and
COMPONENT signals (YC
[COMPUTER IN]
YP P ) from the device connected
B R
to COMPUTER IN.
COMPONENT signals (YC
[COMPONENT
YP P ) from the device connected
B R
IN]
to COMPONENT IN.
S-VIDEO signal from the device
[S-VIDEO IN]
connected to S-VIDEO IN.
VIDEO signal from the device
[VIDEO IN]
connected to VIDEO IN.
Use the ▲ ▼ buttons to place the cursor
1)
on the input to be switched.
2) Press the <ENTER> button.
z Switch to the selected input.

[TEST PATTERN]

You can display 5 types of image patterns for
confirmation.
Press the <ENTER> button to switch to the other patterns.
Pressing the <RETURN> button cancels the function.
Note
z When 3D is being displayed (including converting 2D to
3D), the [TEST PATTERN] cannot be executed. Perform
the operation after switching to 2D.

[LAMP RUNTIME]

You can check how long the lamp has been used.
Attention
z When replacing the lamp, follow the "Lamp unit

replacement procedure" (
to [0].
Note
z When the lamp unit has reached the end of its lifespan
the [LAMP RUNTIME] menu will provide the usage
time notification by flashing red and gray. See "When to

replace the lamp unit" (
[OPTION] menu
C /
B R
C /
B R
page 91) and set the runtime
page 90) about the lifespan.
ENGLISH - 83