[Other Functions] - Panasonic PT-VZ470U Operating Instructions Manual

[START]
[STOP]
[RESTART]
[RESET]
f When [START] or [RESTART] is selected, the elapsed time or the remaining time is displayed at the bottom right of the
projected image.
f When [STOP] is selected, the elapsed time or the remaining time when the count was stopped is displayed at the
bottom right of the projected image.
f When [RESET] is selected, proceed to Step 4).
4) Press the <MENU> button three times, then menu screen will disappear.
f The P-TIMER function is cancelled.
Note
f Presentation timer operations are also possible by the <P-TIMER> button on the remote control. (x page 45)
f The security message set in the [SECURITY] menu → [TEXT DISPLAY] (
time or remaining time is displayed.
f The elapsed time or remaining time is not displayed when the menu screen is displayed.
f The start time becomes "000:00" when [MODE] is set to [COUNT UP].
f When [MODE] is set to [COUNT DOWN], the start time becomes the value set at [TIMER].
f The time gauge turns clockwise when [COUNT UP] is set, and turns counterclockwise when [COUNT DOWN] is set.
Ending the presentation timer
1) Press as to select [P-TIMER].
2) Press the <ENTER> button.
f The [P-TIMER] screen is displayed.
3) Press as to select [EXIT].
4) Press the <ENTER> button.

[OTHER FUNCTIONS]

You can perform some of the remote control button operations by using the sub-menu.
1) Press as to select [OTHER FUNCTIONS].
2) Press the <ENTER> button.
f The [OTHER FUNCTIONS] screen is displayed.
3) Press as to select the item.
[AUTO SETUP]
[FREEZE]
[AV MUTE]
[DIGITAL ZOOM]
4) Press the <ENTER> button.
70 - ENGLISH
Chapter 4 Settings — [DISPLAY OPTION] menu
The count is started.
The count is stopped.
The count is resumed.
The count is reset.
For details, refer to "Using the AUTO SETUP function". (x page 42)
The projected image is paused temporarily and the sound stopped regardless of the playback of
the external equipment. To release this function, press the <RETURN> button or the <FREEZE>
button on the remote control.
Turn off audio and image when the projector is not used for a certain period of time. To release
this function, press the <RETURN> button or the <AV MUTE> button on the remote control.
For details, refer to "Using the DIGITAL ZOOM function". (x page 44)
Æ
page 79) is not displayed when the elapsed