[Initialize All] - Panasonic PT-AE8000U Operating Instructions Manual

[OPTION] menu

[INITIALIZE ALL]

Return all settings to factory defaults.
When you perform this operation, the projector is set
to the standby state for initialization.
1) Press the ▲▼ buttons to select
[INITIALIZE ALL], and press and hold the
<ENTER> button for three seconds or
more.
z The [INITIALIZE ALL] confirmation message
appears.
INITIALIZE ALL
2) Press the ◄► buttons to select [OK],
and press the <ENTER> button.
z The "Initializing ..." screen is displayed followed by
the "Turn OFF computer" confirmation screen..
3) Press the <ENTER> button.
z At this point, all key operations other than the
<ENTER> button and the power <
disabled.
4) Wait until the power indicator of the
projector <ON (G) / STANDBY (R)> lights
up red or flashes (the fan stops).
5) Turn OFF the power supply by pressing
the <OFF> side of the <MAIN POWER>
switch.
84 - ENGLISH
Downloaded From projector-manual.com Panasonic Manuals
INITIALIZE ALL
OK CANCEL
/ | > button are