Menu Navigation; Navigating Through The Menu - Panasonic PT-AE8000U Operating Instructions Manual

Menu navigation

Navigating through the menu

■ Operating procedure
Press
1) Press the <MENU> button on the remote
control or in the controls of the projector.
z The main menu is displayed.
PICTURE
POSITION
LANGUAGE
3D SETTINGS
LENS CONTROL
OPTION
2) Press the ▲▼ buttons to select main
menu items.
z Select the item to be adjusted from the 6 items
[PICTURE], [POSITION], [LANGUAGE], [3D
SETTINGS], [LENS CONTROL] and [OPTION].
The selected item is indicated with a yellow cursor,
and the submenu is displayed on the right hand
side.
PICTURE
POSITION
LANGUAGE
3D SETTINGS
LENS CONTROL
OPTION
3) Press the <ENTER> button.
z The submenu is displayed, and submenu items
become selectable.
Downloaded From projector-manual.com Panasonic Manuals
PICTURE MODE NORMAL
CONTRAST
BRIGHTNESS
COLOR
TINT
COLOR TEMPERATURE
SHARPNESS SIMPLE
DYNAMIC IRIS ON
WAVEFORM MONITOR
SPLIT ADJUST
ADVANCED MENU
PICTURE MEMORY
H-POSITION
V-POSITION
ASPECT 16:9
WSS ON
OVER SCAN
KEYSTONE
4) Press the ▲▼ buttons to select the
submenu item you wish to alter, then
press the
z For items where the setting is switched or that have
a bar scale, the menu screen disappears and only
the selected item (individual adjustment screen) is
displayed, as shown in the diagram below.
H-POSITION
z For items that are only names, pressing the
<ENTER> button displays the next screen and
advanced settings can be performed.
0
Note
0
0
z Pressing the <RETURN> or <MENU> button when the
0
menu screen is displayed returns to the previous screen.
0
z Depending on the signal input, some items may not be
adjustable and some functions may not be usable.
z Some items can be adjusted even if a signal is not input.
z See page 38 for the submenu items.
z When a 3D image is being displayed, the "3D icon" can
be seen at the top left of the menu screen.
■ Returning adjusted values to default
settings
Press the <DEFAULT> button on the remote control
to return the settings/adjustment values to default
settings.
Press
0
This function differs depending on the screen displayed.
0
● When the submenu screen is displayed:
0
The submenu items displayed are returned to
0
their default settings.
● When individual adjustment screen is displayed:
Only the item currently being adjusted is returned
to its default settings.
H-POSITION
Note
z All settings cannot be simultaneously returned to default
settings.
z Some items do not return to default settings even you
press the <DEFAULT> button. Please set those items
individually.
z The vertical bar above the bar scale on the individual
adjustment screen indicates the default setting.
The position of the vertical bar varies depending on the
input signal.
Menu navigation
to switch settings/adjust.
0
3D
0
Default setting
0
Current setting
ENGLISH - 37
0
0
0
0
0