[Other Functions] - Panasonic PT-TMZ400 Operating Instructions Manual

f The factory default value is 10 minutes.
Note
f [TIMER] can be set when [MODE] is set to [COUNT DOWN].
Using the presentation timer
1) Press as to select [P-TIMER].
2) Press the <ENTER> button.
f The [P-TIMER] screen is displayed.
3) Press as to select the item, and press the <ENTER> button.
[START]
[STOP]
[RESTART]
[RESET]
[EXIT]
f When [START] or [RESTART] is selected, the elapsed time or the remaining time is displayed at the lower
right of the projected image.
f When [STOP] is selected, the elapsed time or the remaining time when the count was stopped is displayed
at the lower right of the projected image.
Note
f Presentation timer operations are also possible by the <P-TIMER> button on the remote control. (x page 55)
f The security message set in the [SECURITY] menu → [TEXT DISPLAY] (x page 95) is not displayed when the elapsed time or remaining
time is displayed.
f The elapsed time or remaining time is not displayed when the menu screen is displayed.
f The start time becomes "000:00" when [MODE] is set to [COUNT UP].
f The start time becomes the value set at [TIMER] when [MODE] is set to [COUNT DOWN].
f The time gauge turns clockwise when [COUNT UP] is set, and turns counterclockwise when [COUNT DOWN] is set.

[OTHER FUNCTIONS]

The same function can be realized by operating the menu as an alternative of operating the remote control button.
Using the auto setup function
The dot clock, clock phase and image position can be adjusted automatically when the analog RGB still image
signal is input.
1) Press as to select [OTHER FUNCTIONS].
2) Press the <ENTER> button.
f The [OTHER FUNCTIONS] screen is displayed.
3) Press as to select [AUTO SETUP].
4) Press the <ENTER> button.
Using the freeze function
The projected image is paused temporarily and the sound is stopped regardless of the playback of the external
equipment.
1) Press as to select [OTHER FUNCTIONS].
2) Press the <ENTER> button.
f The [OTHER FUNCTIONS] screen is displayed.
3) Press as to select [FREEZE].
4) Press the <ENTER> button.
f The image is paused and the sound is turned off.
Chapter 4 Settings - [DISPLAY OPTION] menu
The count is started.
The count is stopped.
The count is resumed.
The count is reset.
The presentation timer function is ended.
ENGLISH - 81