Table of Contents
Advertisement
f The start time will be "000:00" when [MODE] is set to [COUNT UP].
f When [MODE] is set to [COUNT DOWN], the start time becomes the value set at [TIMER].
f The time gauge turns clockwise when [COUNT UP] is set, and turns counterclockwise when [COUNT DOWN] is set.
Ending the presentation timer
1)
Press as to select [P-TIMER].
2)
Press the <ENTER> button.
f The [P-TIMER] screen is displayed.
3)
Press as to select [EXIT].
4)
Press the <ENTER> button.
[OTHER FUNCTIONS]
The same function can be realized by operating the menu as an alternative of operating the remote control button.
1)
Press as to select [OTHER FUNCTIONS].
2)
Press the <ENTER> button.
f The [OTHER FUNCTIONS] screen is displayed.
3)
Press as to select one item.
[AUTO SETUP]
[FREEZE]
[AV MUTE]
[DIGITAL ZOOM]
4)
Press the <ENTER> button.
Using the digital zoom function via the menu operation
(Only for the still image signals)
1)
Press as to select [DIGITAL ZOOM].
2)
Press the <ENTER> button.
f The [DIGITAL ZOOM] individual adjustment screen is displayed.
3)
Press qw to adjust the magnification.
Operation menu
4)
Press the <ENTER> button.
f The moving screen is displayed.
5)
Press asqw to move the zoom position.
f For details, refer to "Using the digital zoom function". (x page 45)
Note
f Magnification can be set from 1.0x to 3.0x in 0.1 increments.
f The digital zoom function is canceled if the input signal changes during a digital zoom.
f During a digital zoom, the freeze function is disabled.
f The digital zoom function may not work properly for some still image-based signals.
70 - ENGLISH
Chapter 4 Settings - [DISPLAY OPTION] menu
Automatically adjust the resolution, the clock phase and the image position when analog RGB signals
consisting of bitmap images such as computer signals are being input.
For details, refer to "Using the auto setup function". (x page 44)
The projected image is paused temporarily and the sound stopped regardless of the playback of the external
equipment.
Also press the <RETURN> button or the <FREEZE> button on the remote control to release this function.
Turn off audio and image when the projector is not used for a certain period of time. You can also deactivate
the function by pressing the <RETURN> button or the <AV MUTE> button on the remote control.
Enlarge images and move the image zoom position.
For details, refer to "Using the digital zoom function via the menu operation". (x page 70)
Operation
Press the w button.
Press the q button.
Adjustment
Increases magnification.
Decreases magnification.
Adjustment range
1.0 ~ 3.0
Advertisement
Table of Contents
