Advertisement
the memory.
The hob can remain in this situation for maximum 10 minutes. Then, the hob will switch off permanently.
Activation:
- Select key "Pause" (B) and the relative LED (C) will start flashing. The symbol
will be displayed.
Restore of the cooking phase:
1. The cooking phase can be restored within 10 minutes.
2. Select key "Pause" (B) and the relative LED (C) will start flashing.
3. Select one of the cooking area selection keys (E) within approximately 10 seconds.
• "Recall" function (Fig.2 - Fig.3 (B)):
The "Recall" function allows reactivating the hob with the same set functions in the event that the "ON/OFF"
button is pressed by mistake whilst one or more zones are activated.
If the "ON/OFF" key is accidentally pressed:
- Select key "ON/OFF" (A) within approximately 6 seconds and the relative LED (C) will start flashing.
- Select key "Recall" (B) within approximately 6 seconds.
• Maintenance (Fig.7):
Remove any residues of food and drops of grease from the cooking surface using the special scraper supplied
on request.
Clean the heated area as thoroughly as possible using SIDOL, STAHLFIX or similar products and a cloth/paper, then
rinse with water and dry with a clean cloth. Using the special scraper (optional) immediately remove any fragments
of aluminium and plastic material that have unintentionally melted on the heated cooking area or residues of
sugar or food with a high sugar content. In this way, any damage to the cooktop surface is prevented. Under
no circumstances use abrasive sponges or irritating chemical detergents such as oven sprays or stain removers.
THE MANUFACTURER DECLINES ALL RESPONSIBILITY FOR EVENTUAL DAMAGES CAUSED BY BREACHING
THE ABOVE WARNINGS.
- 14 -
Advertisement
