Blanco BCGC74 - BCGC52 Use And Installation Instructions
Blanco BCGC74 - BCGC52 Use And Installation Instructions

Blanco BCGC74 - BCGC52 Use And Installation Instructions

Crystal glass cooktop
Hide thumbs Also See for BCGC74 - BCGC52:

Advertisement

USE, INSTALLATION AND MAINTENANCE
INSTRUCTIONS FOR BUILT-IN HOT PLATES
Dear Customer
Thank you for purchasing a Blanco Cooktop.
Before we continue telling you about this cooktop, we cordially invite you to become part of the Blanco family by
subscribing to ongoing information and invitations. Please visit our website where you can subscribe and request
such things as invitations to future cooking classes and gourmet recipes. Go to www.meaappliances.com.au and
fill in the subscription details.
You will find that the clean lines and modern look of your Blanco Cooktop blends perfectly with your kitchen décor.
It is easy to use and performs to a high standard.
Blanco also makes a range of products that will enhance your kitchen such as ovens, rangehoods, dishwashers,
microwaves, sinks and taps.
There are models to complement your new Blanco Cooktop.
Of course we make every effort to ensure that our products meet all your requirements, and our Customer
Relations department is at your disposal, to answer your questions and to listen to all your suggestions (see back
cover of manual).
Please complete the warranty section of this manual and keep your receipt as proof of purchase. Retain all
documents relating to the purchase of this products.
Blanco is committed to providing increasingly efficient products that are easy to use, respect the environment and
are attractive and reliable.
BLANCO
We ask that you carefully read the instructions within this booklet to enable you to abtain quality results from the outset.
The appliance must be installed only by an authorised person in compliance with the instructions provided. The manufacturer
declines all responsability for improper installation which may harm persons and animals and damage property.
The appliance must be used for the purpose for which it was expressly designed. Any other use (eg heating rooms) is considered to
be improper and consequently dangerous. The manufacturer declines all responsability for damage resulting from improper and
irresponsible use.
The manufacturer shall not be held responsible for any inaccuracies in this handbook due to printing or transcription errors. The
designs in the figures are purely indicative.
The manufacturer also reserves the right to make any modifications to the products as may be considered necessary, useful or in
the interests of the user, without jeopardizing the main functional and safety features on the products themselves.
If your cooktop requires service, please contact your local customer service centre or your nearest Blanco agent listed at the back of
this booklet.
MODELS: BCGC74 - BCGC52
CRYSTAL GLASS COOKTOP
MOD.: .......................
COD. 01019GG - 18.07.2006

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the BCGC74 - BCGC52 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Blanco BCGC74 - BCGC52

  • Page 1 If your cooktop requires service, please contact your local customer service centre or your nearest Blanco agent listed at the back of this booklet.
  • Page 2 DESCRIPTION OF THE HOT PLATES 1 Ultra rapid gas burner of 2 Semirapid gas burner of 3 Auxiliary gas burner of 4 Cast iron trivet 1 burner 5 Cast iron trivet 2 burner 6 Cast iron trivet 3 burner 7 Burner control knobs Attention: this appliance has been manufactured for domestic use only and is for use by private persons.
  • Page 3 1) BURNERS A diagram is screen-printed above each knob on the front panel. This diagram indicates to which burner the knob in question corresponds. After having opened the gas mains or gas bottle tap, light the burners as described below: - Manual ignition Push and turn the knob corresponding to the required burner in an anticlockwise direction until it...
  • Page 4 Notes: Use of a gas cooking appliance produces heat and moisture in the room in which it is installed. The room must therefore be well ventilated by keeping the natural air vents clear (fig. 3) and by activating the mechanical aeration device (rangehood or electric fan fig. 4 and fig. 5). Intensive and lengthy use of the appliance may require additional ventilation.
  • Page 5 - Do not force the taps if they are difficult to open or close. Contact the technical assistance service for repairs. - Do not use steam jets for cleaning the cooktop. PREVENTATIVE MAINTENANCE This cooktop should not require ongoing maintenance provided you ensure: - All spillages are cleaned up as soon as they occur.
  • Page 6: Installation

    TECHNICAL INFORMATION FOR THE INSTALLER This appliance shall be installed only by authorised personnel and in accordance with the manufacturer’s installation instructions, local gas fitting regulations, municipal building codes, water supply regulations, electrical wiring regulations, AS 5601/AG 601 – Gas Installations and any other statutory regulations.
  • Page 7: Location And Ventilation

    This gas connection is male 1/2” BSP and is situated at the rear of the appliance, 415 mm from the right hand side and 55 mm from the rear of the cooktop. A. The hotplate can be connected with rigid pipe as specified in AS5601 table 3.1.
  • Page 8: Electrical Connection

    7) ELECTRICAL CONNECTION The appliance is supplied with a 1800 mm long flexible supply lead. The point of attachment for this lead is located at the rear and on the underside of the appliance 380 mm from the right hand side. The voltage and power consumption are detailed on the underside of the appliance.
  • Page 9 Always disconnect the appliance from the electricity main before making any adjustments. All seals must be replaced by the technician at the end of any adjustments or regulations. Our burners do not require primary air adjustment. 8) TAPS Our taps are suitable for all gas, they are male conical type.
  • Page 10 9) U-LPG TO NATURAL GAS CONVERSION PROCEDURE Appliance models: Gas crystal glass hotplate models: BCGC74 4 Burners BCGC52 2 Burners 1. Remove each burner cap and burner skirt. 2. Remove the U-LPG main injector with a 7 mm/VF tube spanner and replace with the appropriate size Natural Gas main injector for each burner.
  • Page 11 BURNER ARRANGEMENT ON THE HOT PLATE BURNERS N° DESCRIPTION U-LPG ULTRA RAPID NATURAL U-LPG SEMIRAPID NATURAL U-LPG AUXILIARY NATURAL CONVERSIONS TABLE NORMAL PRESSURE (kPa) 2.75 1.00 2.75 1.00 2.75 1.00 FIG. 14 INJECTOR NOMINAL HEAT DIAMETER INPUT (MJ/h) (1/100 mm) MAX.
  • Page 12: Components Replacement

    WARNING: Always disconnect the appliance from the electricity and gas mains before proceeding with any servicing operation. Servicing should be carried out only by authorised personnel. 11) COMPONENTS REPLACEMENT NOTE: BEFORE ANY MAINTENANCE REQUIRING REPLACEMENT OF A COMPONENT IS UNDERTAKEN ENSURE ELECTRICAL LEAD HAS BEEN ISOLATED AND REMOVED FROM THE POWER POINT.
  • Page 13 TYPE OF HOT PLATE Gas hot plate ATTENTION!!! If the power supply cable is replaced, the installer should leave the ground wire longer than the phase conductors (fig. 21) and comply with the recommendations given in paragraph 8. SERVICING CABLE TYPES AND SECTIONS TYPE OF CABLE H05 RR - F...
  • Page 14: Technical Assistance And Spare Parts

    TECHNICAL ASSISTANCE AND SPARE PARTS MEA – BLANCO TECHNICAL ASSISTANCE AND SPARE PARTS...

This manual is also suitable for:

Bcgc52

Table of Contents

Save PDF