Appendix C Troubleshooting; Problems, Causes, And Remedies - Kodak 6B8773 User Manual

Appendix C: Troubleshooting

Problems, Causes, and Remedies

Problem
Camera does not power on
Camera does not power on when
the power module is used
Nothing appears in the Top Status
LCD
Part of the Battery icon is off in
the Top Status LCD
The Battery icon blinks in the Top
Status LCD
April 28, 2004
Cause
The power module may not be
fully inserted.
Battery is exhausted.
Battery is improperly installed.
Battery is low.
Battery is exhausted.
Battery is not functioning for
unknown reason
Remedy
Use a fully charged battery or the power
module.
Remove the memory card from the camera and
try to turn the camera on.
Be sure the cable is fully inserted into the power
module (see page 3-2).
• You will feel and hear a soft "click" as the
cable is inserted properly in place.
• You may have to use a considerable amount
of push to "click" the cable in place.
Replace the battery (see
Insert the battery properly.
Have a fresh battery ready.
Replace the battery (see
Remove, then insert the battery and turn the
camera on.
page 3-4).
page 3-4).
C-1