Loading Settings From A Card; Deleting Settings - Kodak 6B8773 User Manual

Controlling Exposure
Loading Settings from a
Card

Deleting Settings

7-6
Using the DCS Photo Desk software, you can save settings to the root
directory of a card. (These filenames have .WB extension.)
IMPORTANT: Settings must be saved to the root directory or you will
not be able to load them into your camera.
You can then put the card in your camera and load the settings into camera
memory. A maximum of 10 settings can be stored in camera memory.
1. Choose Load from Card from the Saved Settings menu, choose a card
(if two are inserted), then highlight a setting.
2. Press the OK button to load the setting.
To make room in camera memory for new settings, you can delete settings
that you no longer use.
1. Choose Delete Settings from the Saved Settings menu, then highlight a
setting.
2. Press the OK button to delete the setting and close the confirmation
screen.
April 28, 2004