Kodak 6B8773 User Manual page 212

Troubleshooting
Problem
Image contrast is wrong in the
Image LCD.
Exposure is off.
Exposure Meter icon blinks in
the Top Status LCD.
Shutter Speed display shows
"Err" in the Top Status LCD.
The Top Status LCD does not light
up.
Autofocus does not work.
Difficulty seeing images on the
Image LCD
No image appears on the external
video monitor.
C-4
Cause
The Exposure setting is out of
range.
Lens aperture reset switch is
defective.
Main mirror is out of sequence
with camera firmware.
Battery is exhausted.
The Focus Mode switch on the
lens is set to M.
The lens is not properly
mounted.
Image LCD is dirty.
Image LCD is worn out.
Video cable is not inserted
correctly
Remedy
Adjust using the Display Contrast feature (see
page 11-8).
Capture a test image, use the histogram (see
page 11-3) and zoom to 1:1 (see
view luminometer readings and determine if
exposure adjustments (aperture, shutter speed,
ISO) are necessary.
Choose an appropriate exposure value (see
page 7-7).
Replace or repair lens.
Turn the camera off, then on.
Replace the battery (see
Set the Focus Mode switch on the lens to AF
(see page 8-1).
Mount the lens correctly (see
Clean the Image LCD (see
Contact your camera dealer.
Insert the video cable correctly (see
page 12-1).
page 11-4) to
page 3-4).
page 2-18).
page 14-2).
April 28, 2004