Correcting Digital Exposure; Setting Exposure Bias - Kodak 6B8773 User Manual

Setting up Cards, Folders, and Files
Correcting Digital
Exposure

Setting Exposure Bias

6-14
Use Digital Exposure Correction to correct errors in exposure.
This feature helps correct errors but is not a substitute for proper exposure
settings (shutter speed, aperture, and ISO).
NOTE: Do not confuse Digital Exposure Correction with Exposure
Compensation, which modifies exposure.
Digital Exposure correction is applied to JPEG images on the camera. It is
not applied to Raw images on the camera. Rather, the information is saved
and applied when the images are processed in the DCS Photo Desk
software. (You can also change the setting in the DCS Photo Desk
software.)
1. Choose Digital Exp. Corr. from the Image menu, then highlight Off or
On.
2. Press the OK button.
If you use more than one KODAK PROFESSIONAL DCS Pro SLR/c Digital
Camera in your studio, you may want to adjust the exposure so that all of
your cameras produce consistent output. You can set the Exposure Bias
in -0.5 to +0.5 in 1/10 stop increments. Exposure Bias is applied to JPEG
images on the camera. It is not applied to Raw images on the camera.
Rather, the information is saved and applied when the images are
processed in the KODAK PROFESSIONAL DCS Photo Desk software.
1. Choose Exposure Bias from the Image menu, then highlight the
desired setting.
2. Press the OK button.
April 28, 2004