Device And Media Preparation - Kodak 6B8773 User Manual

Capture Workflow
Device and Media
Preparation
9-2
• Install the included software.
• Calibrate your monitor and printers regularly, for example, weekly.
• Charge one or more batteries. Insert a battery.
• Set the time and date, if needed.
• Set the Exposure mode.
• Choose an Exposure Metering mode.
• Set the Autofocus mode.
• If you have used a memory card for several sessions (two or three
dozen), you may want to format it on the camera you will be using so
that the full capacity of the card is available and the Recover Card
feature will function.
• Insert each memory card to be used and check the Back Status LCD to
be sure there is adequate space available. Delete images if necessary.
• Choose a capture folder and a file type.
• Set ISO based on available light.
• Set up White Balance.
To set up White Balance on the camera, select an image with a
MACBETH color chart, a gray card or a neutral area in the image, then
perform Click Balance.
To set up White Balance in the KODAK PROFESSIONAL DCS Photo Desk
software, capture an image of a MACBETH color chart, a gray or white
card, then adjust later using the software.
• Set up Job Tracker, if needed.
NOTE: Custom RGB slider values in DCS Photo Desk software are not
saved as part of custom White balance files generated by the DCS
Photo Desk software.
April 28, 2004