Kodak 6B8773 User Manual page 49

April 28, 2004
3. Insert a battery in the battery slot on the charger/adapter.
The appearance of the Charging LED varies, depending on the status of
the charging operation:
Color
green one blink
green two blinks
green three blinks
green constant
red blinks about once / sec. Charge pending
red blinks rapidly
4. Remove the battery when the charge is complete (the green light stays
on constantly).
5. Let the battery cool down for 15 to 30 minutes. Put the battery in the
charger again until the green light indicates that charging is complete.
NOTE: For optimum battery performance, periodically discharge the
battery before charging.
Powering Your Camera
Action Charging Status
0 - 50% complete
50 - 70% complete
70%+ complete
Charge complete
Error condition
3-3