Table of Contents
Advertisement
MONACO
Ensure that you read all of the safety instructions before using this unit.
TROUBLESHOOTING AND TECHNICAL SPECIFICATION
Troubleshooting
If a fault occurs, first check the points listed below before taking the set for repair.
If you are unable to remedy a problem by following these hints, consult you retailer or service
professional.
WARNING: under no circumstances should you try to repair the set yourself, as this would invalidate the
warranty.
PROBLEM
No Sound
Music is not streaming over Bluetooth
Music doesn't resume hanging up
a call
TECHNICAL SPECIFICATION
1. General
Power AC/DC Adaptor
Max power consumption
Dimensions of main unit
Weight of main unit
2. Amplifier
Power Output
3. Speaker system
Impedance
4. AUX IN
Input
Max voltage
Impedance
Specifications subject to change without notice.
REMEDY
Adjust the volume
Connect the AC adaptor properly
Make sure your Bluetooth device has A2DP profile.
Check if both devices are paired and connected over Bluetooth.
Make sure there isn't a 3.5mm cable connected to the aux input on
the back of the speaker.
Restart the UniStream to auto-connect with your Bluetooth device.
Press play to resume music.
Input: AC 100-240V ~ 50/60Hz
Output: 16V
35W
220
mm(L) x 55mm(W) x 130mm(H)
1.3
Kgs
10Wrms X 2
8
Ω 2" Speaker x2
Φ
3.5mm
1 V
47 KΩ
10
1.8A
Hide quick links:
Advertisement
Table of Contents
