Using The Ac Adaptor; Connecting External Devices - Blaupunkt Monaco Series Instruction Manual

MONACO
Ensure that you read all of the safety instructions before using this unit.

USING THE AC ADAPTOR

Connect the single plug into the "DC IN" jack on the unit's back panel. Then, connect the AC Adaptor into the
240V AC outlet.
NOTES:
• The housing of the AC adaptor may become warm during operation. This is normal.
• To reduce the risk of electric shock never connect or disconnect the AC adaptor while your hands are wet.
• Please use original AC adaptor supplied with the unit, to avoid damage to the unit.
• Ensure the "DC IN" plug is connected to the unit BEFORE connecting to the mains socket.
Ensure that you read all of the safety instructions before using this unit.

CONNECTING EXTERNAL DEVICES

Complete the connections as shown below:
• AUX connection requires a 3.5mm audio cable to connect your external audio source to the AUX input on the
back of the main unit.
Note: It will auto-switch into AUX IN mode from Bluetooth mode after insert AUX IN cable to main unit. If want
to back to Bluetooth mode , Please remove AUX IN cable from unit.
USB
AUX IN DC IN 16V
5V 500 mA
USB
AUX IN
5V 500 mA DC IN 16V
5 5
Cable
Plug x 1 Plug x 1
EXTERNAL DEVICE