Troubleshooting; Specifications; Care And Maintenance - Blaupunkt MS BT 26e Instruction Manual

MS BT 26e/MC CD 42e
Trouble shooting
PROBLEM
No sound
Static Sound
Sound is distored
Desired station not found
The display is blank
I can hear a burbling noise
on some stations
The sound is weak or of
poor quality

Specifications

Power source
Max. power consumption
Standby power consumption
FM frequency
FM presets
USB supported file formats
Bluetooth version
Bluetooth working distance
Input jacks

Care and maintenance

After using the unit---- Switch to standby and power off the unit. Unplug the unit and
avoid leaving batteries fitted if you are leaving it unattended for a long period (holiday
etc). The batteries may leak and damage the remote control.
Care and cleaning---- All care and cleaning operations should be carried out with the
unit unplugged from the mains power. Occasionally wipe the cabinet with a lint free
duster. Never clean the unit with liquids or solvents.
CAUSE
Volume not turned on
Signal reception too low
Volume is too high
Weak signal
This may occur if the broadcaster
changes the label of a service or
removes a label while tuned.
Weak signal
Other devices, e.g. a television,
are interfering with reception.
220-240V~50Hz
40 Watt
< 0.5 Watt
87.5 ~ 108MHz
30
M 3 and WMA P
CSR V2.1+EDR
33 ft. (10 m)
USB and AUX IN
61
SOLUTION
Adjust the main volume knob
Adjust the antenna or move the
unit to a stronger signal location
Use the Manual Tune function
The radio will try to retune
performance a scan.
Try re-positioning the aerial
Move the unit further away
from these devices.