Descaling - Miele Steam oven Operating And Installation Instructions

Descaling

k
To prevent the risk of damage you should only use the
special Miele descaling tablets for descaling the
appliance (see "Optional accessories").
Do not let descaling agent come into contact with the
metal control panel or the handle as this could cause
marks to appear. Should descaling agent get onto these
surfaces, wipe it away immediately.
The appliance needs to be descaled after a certain number
of operating hours. When it needs descaling the descaling
symbol k and the number 10 will appear in the display when
the appliance is switched on. The number indicates that the
appliance can be used 10 more times before it has to be
descaled.
If you do not run the descaling programme immediately a 9
will appear in the display the next time it is switched on.
The appliance will lock after the last remaining cooking
process and it must be descaled before it is used again. We
recommend descaling before it locks out.
^ Touch the s sensor until the k symbol and the duration
"0:38 h" appear in the display.
^ Fill the water container with 1.0 litre of cold tap water and
drop 2 descaling tablets in it.
^ Push the water container into the appliance until it
connects.
^ Confirm with "OK".
The colon will flash and the k symbol will now light up
constantly in the display. Descaling will now begin.
It is only possible to cancel the descaling process during
the first 6 minutes.
Do not switch the appliance off during the descaling
process. If if is switched off before the end of the process,
the whole process will have to be started from the
beginning again.
Cleaning and care
77