Miele Steam oven Operating And Installation Instructions page 83

Table of Contents

Advertisement

Problem
The ? symbol appears in
the display and an audible
tone may sound.
The k symbol and a
number between 1 and 10
appear in the display.
"0:38h" and k flash.
F and a number appear in
the display.
F 44
F 195
F ..
Other fault codes
Possible cause and remedy
The water container has not been pushed into the
appliance properly.
^ Remove the water container and push it back in
so that it connects.
There is not enough water in the water container.
The water level must be between the two marks.
^ Fill the water container
The appliance needs to be descaled.
^ Proceed as described in "Cleaning and care -
Descaling".
Communication fault
^ Switch the appliance off and then back on again
after a few minutes.
If the fault code appears in the display again call
Service.
Technical fault.
Switch the appliance off and call the Service
Department.
Problem solving guide
83

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dg 6100Dg 6200

Table of Contents