Disconnecting The Dcs 645 From The Camera Body - Kodak 645 User Manual

The Basics
Disconnecting the DCS 645 from the
Camera Body
Place the camera on a table or other flat
1
surface.
2 If they are connected, unplug the video cable
(page 140) and the IEEE 1394 cable
84). Turn off and disconnect all flash and
strobe systems.
3 Turn off the camera body.
If the DCS 645 is being powered by battery,
4
remove the battery
If the DCS 645 is being powered by AC
adapter, disconnect the AC adapter.
Rotate the DCS 645M or 645C Release button
5
to the left and press, then pivot the top of the
camera body away from the DCS 645. For the
DCS 645H the Release handle is on the
camera body.
Contents Back
(page
(page 64).
Next
6 Carefully remove the DCS 645 from the
camera body.
Do not store the DCS 645 with an attached
battery or with the AC adapter plugged in.
Index
DCS 645
Release
button
58