Belling IHTK60 Users Manual & Installation Handbook page 22

Connect to the electricity supply
(For Fixed Wiring only)
Warning: This appliance must be
earthed.
The hob must be installed by a competent
electrician, using a suitable double pole
control unit, with 3mm minimum contact
separation at all poles.
We recommend that the appliance is
connected by a competent person who
is a member of a "Competent Person
Scheme" who will comply with the re-
quired local regulations.
Connection should be made with a
suitable cable.
Important: Ensure that you route all
mains electrical cables well away from
any adjacent heat source, such as an
oven or grill.
Strip the wires & connect to the terminal
block as shown in the diagram & table
below.
Fit the cable clamp & secure with the
screw provided.
Close the terminal box, ensuring that the
cover is engaged on the locking tabs.
MAINS CABLE
INSTALLATION
CABLE CLAMP
Wire Colour
Live Brown
Neutral Blue
Earth Yellow/
green
BRIDGES
Connect to:
L2
N4