Belling IHTK60 Users Manual & Installation Handbook page 12

3. Set the timer by pressing the up (+)
and down (-) keys. Pressing down
(-) first sets the timer to 30 minutes.
This can then be adjusted using the
up (+) and down (-) keys.
4. The timer indicator in the display
stops flashing and is not displayed.
Operation of a timer is shown by a
stationary dot in the cook zone dis-
play for the timed cook zone.
When the time is up
1. The timer display will flash, the timer
will beep and the cook zone will auto-
matically turn off.
2. The timed cook zone display will
show a flashing dot.
3. Touch any key to stop the beeping.
Additional timer information
To modify or cancel a timer follow steps 1
to 4 above in "To operate". Setting back to
zero will cancel the timer. To set the timer
for additional zones follow steps 1 to 4
above in "To operate".
To check the timer setting for a cook zone
select a timed cook zone and then press
the up (+) and down (-) keys simultane-
ously to show the time remaining.
If multiple timers have been set then the
timers can be checked as follows:-
1. Ensure that a cooking zone has not
been selected.
2. Select the timer by pressing the up
(+) and down (-) keys simultane-
ously.
3. Press the up (+) and down (-) keys
as many times as necessary to dis-
USING THE HOB
4.
Pan detection
As soon as you lift the pan off the zone
the power is automatically reduced, help-
ing to save energy. The above "U" symbol
appears when a zone has been activated
but no pan has been placed on the cook
zone, If the "U" symbol does not disap-
pear when a pan is placed on the zone it
indicates that the pan is not suitable for
induction cooking.
Note: This means the hob only uses
power when a suitable pan is placed on
the zone, this reduces the energy used
during the cooking process, i.e. when
you take your pan off the zone the hob
automatically reduces the power, and only
switches back on when you replace the
pan.
Child Lock "L"
This feature is to help prevent accidental
switching on of the hob, especially by
young children.
To Activate:
1.
2.
3.
play the timer for the required cook
zone (the active cook zone times are
cycled clockwise). The stationary dot
in the cook zone display will flash
when the timer is displayed for that
zone.
If the minute minder has also been
set it will be displayed first. In this
case other timed cooking zones are
shown by a stationary dot in the cook
zone display.
Select the On/Off Key.
Simultaneously touch the RHF cook
zone and the down (-) keys, the hob
should beep.
Remove fingers and touch the RHF