Adjusting Record Out Level; Independent Phase Inversion; Setting Out 2 Offset; Setting Input Offset - JEFF ROWLAND CORUS STEREO PREAMPLIFIER Operational Manual

ADJUSTING RECORD OUT LEVEL

Enter . Scroll and select
MENU
gain of the selected input routed to the
panel's volume knob or the remote's
The
RECORD OUT LEVEL
buttons. Exit by pressing any of the
VOL +/−

INDEPENDENT PHASE INVERSION

Enter . Scroll and select desired phase condition. Possible phase conditions
MENU
include
PHASE NORMAL
display. Exit by pressing any of the
The
CORUS PREAMPLIFIER
important system debugging tool. It facilitates effective troubleshooting of phase
inversion problems on associated electronic components, speakers, speaker wires, and
interconnects, particularly in complex audio systems consisting of multiple amplifiers and
multiple source components.

SETTING OUT 2 OFFSET

Enter . Scroll and select
MENU
the amount of offset. Adjust the offset with the front panel's knob or the remote's
NAVIGATION RIGHT () NAVIGATION LEFT ()
buttons
.

SETTING INPUT OFFSET

Enter . Scroll and select
MENU
the amount of input offset gain
NAVIGATION RIGHT () NAVIGATION LEFT ()
ADJUSTING
OUT 2 OFFSET
Enter . Scroll and select
MENU
the amount of offset
.
NAVIGATION RIGHT () NAVIGATION LEFT ()
buttons.

FACTORY RESTORE

Enter . Scroll and select
MENU
and adjustments to the original factory-set default values: Main and record volume levels
are set to 0dB, input device name assignments are cleared, input and output gain offset
adjustments are zeroed, and the
RECORD OUT LEVEL
RECORD-OUT
REC OUT VOL +/−
mode is also entered by pressing either of the remote's
, ,
INVERT BOTH INVERT RIGHT
buttons.
MENU
's independent phase inversion control on each channel is an
OUT 2 OFFSET
buttons. Exit by pressing any of the
INPUT OFFSET
. Adjust the offset with the front panel's knob or the remote's
buttons. Exit by pressing any of the
OUT 2 OFFSET
Adjust the offset with the front panel's knob or the remote's
buttons. Exit by pressing any of the
FACTORY DEFAULTS
CORUS PREAMPLIFIER
. The main volume indicator shows the
jacks. Adjust the level with the front
buttons.
buttons.
MENU
, and
INVERT LEFT
The balance indicator bar temporarily shows
.
The balance indicator bar temporarily shows
.
. The balance indicator bar temporarily shows
. This action returns all configuration
is returned to AC operation.
REC OUT
as indicated on the
MENU
buttons.
MENU
MENU
21