JEFF ROWLAND CORUS STEREO PREAMPLIFIER Operational Manual page 12

5. CHANNEL BALANCE/OFFSET INDICATOR. The channel balance indicator is a horizontal
bar graph located to the right of the phase indicator. The cursor changes from a small square
to a diamond shape at the center of the bar graph when the left and right channels have
identical gains, or when no input gain offset has been added to a selected input. Whenever a
channel balance or gain offset is adjusted the cursor will change from a diamond to a square.
Each increment of the cursor is equal to one-half dB of gain offset of each channel, or a one
dB difference between right and left channels.
6. INPUT NUMBER INDICATOR
jacks. If inputs
OUTPUT 1/2/B
are selected,
UNBAL
7. INPUT LABEL INDICATOR
selected will be indicated. A complete list of input names is provided in the
menu function is selected.
8. VOLUME/MUTE INDICATOR. This display shows the current volume of the selected input
numerically, from 00.0 to 99.5, in 0.5 dB increments. When the preamp is muted the volume
indicator numbers will be surrounded by corner brackets which indicates that the selected
volume will be decreased by 20 dB. The selected volume numbers will also be decreased by
20. When the preamp is fully muted the original volume indicator numbers will be surrounded
by full brackets which indicates that the selected volume will be decreased to zero.
. Indicates which input number is routed to the
through are selected
1 4
will be indicated.
.
If the input is labeled via the
will be indicated. If inputs
BAL
function, then the label
MENU
MENU
MAIN
or
5 6
when the
12