D-Link HorstBox DVA-G3342SD Manual page 4

D-Link
1. The device must be used in accordance with the instructions
for use.
2. For transport, use the original wrapping or a adequate wrap-
ping. Protect the HorstBox against shocks and blows.
3. To avoid condensation wait until the device has reached
room temperature before you put it into operation. The
HorstBox has to be completely dry.
4. Review the information about the environmental conditions
in the specification (see section Appendix in the manual). In
the manual read the sections "Installation" and "Installation
Considerations".
5. Use only the power adaptor supplied.
6. The electrical installations in the room must meet regulatory
requirements.
7. The wall socket or power source must not be shared by other
power consumers. Do not use an extension cable.
8. The unit is completely disconnected from the power source
only when the power cord is disconnected from the power
source. Therefore the power cord and its connectors must
always remain easily accessible.
9. Take care that there are no cables, particularly power ca-
bles, in the areas where persons can trip over them. For
installation follow the instructions in section "Installation"
in the manual.
10. Use only adequate and undamaged power cords and network
or telephone cables.
11. Do not connect or disconnect data cable connection during
thunderstorms.
12. Clean the HorstBox with a damp cloth only.
13. Do not set up the device in the proximity of heat sources
or in a damp location. Make sure the device has adequate
ventilation.
14. Take care that no extraneous objects or liquids enter the
housing.
HorstBox DVA-G3342SD 4