A Quick Guides and FAQs
This chapter offers some Quick Guides and Frequently Asked
Questions (FAQs).
A.1 Internet Access
To enter access data open the page DSL C
I
. If requested by your Internet Service Provider (ISP),
NTERNET
you may change the settings for MTU, MRU, VPI and VCI in
Expert Mode.
Note: Use only the values provided by your ISP. Do only change
the following values if requested by your ISP. Choosing
improper values may causes deterioration of performance
and data transfer rate or no internet connectivity at all.
Changes only on value at once and control the behavior of the
HorstBox afterwards.
A.2 How to Set Up an Analog Connection?
• Connect the black analog cable to the black connector "'a/b
S0 Ext"' at your HorstBox. Connect the other end to the
corresponding jack at the DSL splitter.
• Connect an analog phone to one of the analog ports (red)
"Tel 1" or "Tel 2" on the HorstBox. Use the adaptor provided
(left port, f-coded) and the cable of your telephone.
• Use the adaptor delivered (right port, f-coded).
on the tab
ONNECTION