Edit Settings; Wlan; Activate Wlan; Enable Wlan - D-Link HorstBox DVA-G3342SD Manual

6.3 WLAN

Define the lease time in the field L
86400 seconds (= 24 hours).
To save the settings, click on S
If an error occurs you will see an error message (red frame).
Change the settings in the box with the red frame and again click
on S .
AVE
To discard all recent entries click on D
In the section Active Clients you will see clients connected to the
DHCP server.

6.2.2 Edit Settings

To edit the settings, change the values and click on S
6.3 WLAN
To use the HorstBox as a WLAN Access Point enable the option
WLAN Access Point and choose the Security Settings.

6.3.1 Activate WLAN

To switch the Access Point (AP) on, use the WLAN switch on the
back panel. Settings changed while the AP was switched off,
become active once the AP is switched on.
To switch the Access Point (AP) off, use the WLAN switch on the
backpanel. The status of the AP is reported by the LED "WLAN"
(off) and by a message on the page WLAN.

6.3.2 Enable WLAN

Switch the AP on and activate the option Enable Access Point.
T
EASE IME
.
AVE
E
ISCARD
118
. Default value:
.
NTRY
.
AVE