No Connection To Internet In Infrastructure Mode; No Wireless Connectivity - D-Link HorstBox DVA-G3342SD Manual

B.3 No Connection to Internet in Infrastructure Mode
Check the IP addresses and subnet masks. All IP addresses
should belong to the same network segment, e.g. 192.168.0.x.
Note: Default IP address: http://horstbox
Two computers in a LAN using the same IP address will interfere
each another and disturb the network traffic.
Try to ping all computers in your network.
Note: If the IP address of the HorstBox was changed, please
ping the new IP address.
B.3 No Connection to Internet in
Infrastructure Mode
Check the IP address of the WLAN client(s). Check IP address and
subnet mask of the access point. All IP addresses must belong to
the same network segment, e.g. 192.168.0.x
Check that the WLAN client connects to the right access point
and the desired WLAN.
Note: Default IP address: http://horstbox
For how to set up a WLAN device to use a static IP address, please
refer to the documentation of the device.
When using a DNS server do not forget to enter the IP address of
the default gateway. You may use the HorstBox as a DHCP server
and assign IP addresses for the devices automatically.
Check router, default gateway and DNS server by sending ping
commands. Please refer to the documentation provided by your
ISP for the necessary IP addresses.
B.4 No Wireless Connectivity
Using D-Link (WLAN) products enables you to access your LAN
and the Internet from almost any place. Please read the sec-
tion 1.2 Installation Considerations on p.13 and learn how to
169