Table of Contents
Advertisement
Reverse this procedure to install the display panel cable.
Speakers
Description
Speakers (include left and right speakers and cables)
Before removing the speakers, follow these steps:
1.
Shut down the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on,
and then shut it down through the operating system.
2.
Disconnect all external devices connected to the tablet.
3.
Disconnect the power from the tablet by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the tablet.
4.
Remove the back cover (see
5.
Remove the middle frame (see
6.
Disconnect the battery cable from the system board (see
Remove the speakers:
1.
Unsolder the red and black speaker cables (1) from the system board speaker contact points.
NOTE:
"positive" speaker terminals. The black speaker cables are soldered to the system board "negative"
speaker terminals.
Back cover on page
Middle frame on page
When installing the speakers, the red speaker cables are soldered to the system board
18).
20).
Battery on page
Spare part number
796818-001
21).
Speakers
29
Advertisement
Table of Contents
