Table of Contents
Advertisement
11.
Remove the system board (2).
Reverse this procedure to install the system board.
WWAN antenna
Description
WWAN antenna (includes cable, transceiver, and double-sided adhesive)
Before removing the WWAN antenna, follow these steps:
1.
Shut down the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on,
and then shut it down through the operating system.
2.
Disconnect all external devices connected to the tablet.
3.
Disconnect the power from the tablet by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the tablet.
4.
Remove the back cover (see
5.
Remove the middle frame (see
6.
Disconnect the battery cable from the system board (see
7.
Remove the system board (see
Remove the WWAN antenna:
Back cover on page
18).
Middle frame on page
System board on page
20).
Battery on page
21).
30).
Spare part number
796823-001
WWAN antenna
33
Advertisement
Table of Contents
