Table of Contents
Advertisement
1.
Detach the WWAN antenna transceiver from the display panel assembly. (The WWAN antenna
transceiver is attached to the display panel assembly with double-sided adhesive.)
2.
Remove the WWAN antenna cable and transceiver.
Reverse this procedure to install the WWAN antenna.
WLAN antenna
Description
WLAN antenna (includes cable, transceiver, and double-sided adhesive)
Before removing the WLAN antenna, follow these steps:
1.
Shut down the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on,
and then shut it down through the operating system.
2.
Disconnect all external devices connected to the tablet.
3.
Disconnect the power from the tablet by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the tablet.
4.
Remove the back cover (see
5.
Remove the middle frame (see
6.
Disconnect the battery cable from the system board (see
7.
Remove the system board (see
34
Chapter 5 Removal and replacement procedures
Back cover on page
18).
Middle frame on page
System board on page
20).
Battery on page
21).
30).
Spare part number
796822-001
Advertisement
Table of Contents
