Table of Contents
Advertisement
Technical Information
Figure 5-13: Condenser Fan Screws
5.12
Residual Moisture Sensor Removal
1. Open the front service panel; see Section 5.2 or 5.3.
2. Locate the residual moisture sensor (refer to Figure 5-14).
3. Remove the screw securing the sensor to the frame.
Figure 5-14: Residual Moisture Sensor and Screw
4. Lift the sensor assembly (with bracket) from the appliance.
5. Note/mark wire positions for re-assembly.
6. Disconnect the electrical connections.
34
T 15xx Dryers
Advertisement
Table of Contents
