Changing The Residual Moisture Target; Starting A Drying Programme; End Of Programme - Miele PT 8257 WP Operating And Installation Instructions

en - Drying

Changing the residual moisture target

Before the programme starts, you can individually set the residual moisture target for the
fabrics by taking the following steps:
The residual moisture target can be set in 1 % intervals from -4 % to 40 %.
Rotate the selector dial until the entry field for the residual moisture target is selected.

2 Cottons dry
0 %
Drying
Cooling down
Press the selector dial to confirm the selection.

The residual moisture target can now be changed by rotating the selector dial.
Rotate the selector dial until the required residual moisture target has been set.

Press the selector dial again to confirm the set residual moisture target.

You have now changed the residual moisture target for fabrics.

Starting a drying programme

Once you have made all the required changes, you can start the modified drying pro-
gramme.
Press the  button.

The drying programme is now running. The programme sequence is shown in the display.
2 Cottons dry
0 %
Drying
Cooling down
Example of programme sequence display
In the second display line (
ture (>40 %) and the  symbol (= heating activated) are also displayed. The next pro-
gramme block is shown in the 3rd display line.
The time for the end of programme is shown to the right of the display (here:
at 12:35
).
The end of programme display has an autonomous learning function. Several programme
sequences are therefore required for the exact time.

End of programme

2 Cottons dry
Programme finished
Anti-crease

Example of end of programme display
18
13,0 kg
70 °C


>40 %

Finish at 12:35

 
Drying
in the above example display), the current residual mois-
Finish at 12:35




Finish