Display Residual Moisture; Delay Start - Miele PT 7137 WP Vario Commissioning, Programme Chart And Settings

Display residual moisture

The residual moisture of the drying
stage reached is displayed as a %
during the programme sequence.
– Factory default: without
percentage.

Delay start

You can set a later start time using the
Timer (see "Timer" in the Operating
and installation instructions). You can
decide how this time is displayed.
– Programme end
The finish time for the programme is
selected.
– Programme start
The start time for the programme is
selected.
– Time until start
The time to the start of the
programme is selected in minutes/
hours.
– Off (factory default)
When the Timer button is pressed,
only the programme duration, the
predicted programme finish time and
the current time of day is displayed -
provided Time not displayed has not
been selected in the Time of day
setting.
Settings
23