Front Panel Opening, Condenser Models; Front Panel Opening, Vented Models; Power Electronic Removal; T 1515, T 1520, T 1526, T 1565 C And T 1570 C - Miele T 15xx Technical Information

T 15xx Dryers
5.2

Front Panel Opening, Condenser Models

1. Remove the four screws (Figure 5-1, Item 3).
2. Remove the condensed-water drawer and unscrew the three screws (Figure
5-1, Item 4).
3. Press the spring clip (Figure 5-1, Item 2) down with the lid opener and open
the front panel.
5.3

Front Panel Opening, Vented Models

1. Remove the left section of the fascia panel using a lid opener (Figure 5-2,
Item 1).
2. Remove the four screws (Figure 5-1, Item 3).
3. Remove the two screws (Figure 5-1, Item 4)
4. Press the spring clip (Figure 5-1, Item 2) down with the lid opener and open
the front panel.

Figure 5-2: Removing the Left Section of the Fascia Panel

5.4

Power Electronic Removal

5.4.1

T 1515, T 1520, T 1526, T 1565 C and T 1570 C

1. Open the front door and remove the screw near the 4 o’'clock position (see
Figure 5-3).
2. Open the front panel (see Section 5.2 or 5.3).
3. Slide the power electronic upward to release it from its frame.
4. Disconnect the electrical connections and remove the electronic.
27
Technical Information