Related Manuals for Miele T 1576 VENT ED DRYER
Summary of Contents for Miele T 1576 VENT ED DRYER
- Page 1 Operating Instructions Vented Dryer T 1576 To prevent accidents and machine damage read these instructions installation or use. M.-Nr. 05 658 821...
- Page 2 Changing the light bulb ..........16 Power failure - Emergency door release ....... . 16 PC Update .
- Page 3 Keep the area around the air intake They give off vapors that could ignite or (toekick) and adjacent surrounding explode. areas free from lint, dust and dirt. Do not allow children to play on or The interior of the machine and in the appliance.
-
Page 4: Grounding Instructions
Do not repair or replace any part of WARNING – Improper connection the appliance or attempt any of the equipment grounding servicing unless specifically conductor can result in a risk of electric recommended in these Operating shock. Check with a qualified Instructions. - Page 5 Power cord with plug Control panel Door Exhaust connection (left or rear) Four height adjustable screw feet...
- Page 6 Opens the door or can be used to turning the machine on or if the cancel a program. program was not started. – a few minutes after the end of a program. Begins the selected program. The indicator: – flashes when the program can be shows the current cycle of the drying started.
- Page 7 Close zippers and tie up fabric belts and apron ties. If no symbol is present: Do not dry items that may melt or ignite Dry cottons and permanent press in the dryer such as plastics, rubber or laundry in their corresponding sneakers.
- Page 8 ^ Press the "Door" button to open the door. ^ Load the laundry loosely into the drum. ^ Close the door with a firm swing - do not push it shut. Do not use fabric softener sheets in this dryer. Silicates contained in these sheets could cause the dryer to overheat.
- Page 9 ^ Turn the program selector clockwise or counterclockwise to the desired program. Please refer to the "Programs" chart.
- Page 10 If fabrics are too damp for ironing, redry using "Hand iron r". Cotton or linen fabrics, which To prevent moisture loss, roll up will be ironed with a rotary iron. the laundry until ironing. Permanent press items. Permanent press and blended fabrics made of blended woven or knitted fabrics, e.g.
- Page 11 For drying delicate fabrics at a lower program by pressing the respective temperature and extended time. button. A tone will sound at the end of a = dry option selected program. = dry option not selected The volume of the buzzer can be...
- Page 12 The "Anti-crease/End" indicator will light at the end of a program. ^ Turn the program selector to "Finish". ^ Press the "Door" button to open the ^ Press the "START" button. door. ^ Remove the laundry. ^ Check that the drum is empty.
- Page 13 Once the door pops open, laundry can made by cancelling the current be added or removed. program. ^ Close the door and press "START" to continue drying. ^ Turn the program selector to "End". When the program has been canceled the "Anti-crease/End"...
- Page 14 When activated, the safety lock 1. Close the door and turn the program prevents the dryer from being operated selector to "End". by locking the control panel functions. 2. Turn on the dryer using the "On/Off" button. 3. Press and hold the "Turbo" button while performing steps 4.
- Page 15 ^ Open the door and remove the lint ^ Stainless steel surfaces can be filter. cleaned using a non-abrasive ^ Wipe the lint off the filter with your stainless steel cleaner. hand, do not use any sharp objects! ^ Wipe dry using a soft cloth.
- Page 16 To reduce the risk of electric shock, disconnect this appliance from the power supply by unplugging or tripping the circuit breaker. ^ Pull forward on the unhinged side of the door. ^ Unscrew the plastic bulb cover located inside the drum and above the door (see illustration.)
- Page 17 With the following guide, minor problems can be fixed without a service call. If the "On" indicator is Reselect the program in the lit you may not have correct sequence, see selected the program "Using the dryer". properly. If the "On" indicator is not –...
- Page 18 Deactivate the safety activated. lock. See "Child safety lock". This is not a fault. It will go off after the program has finished. The program selector was Turn the program selector moved after the start of back to the original the program.
-
Page 19: Quick Guide
Quick Guide Remove this guide for easy reference Please read all instructions, especially the "Important Safety Instructions", using the dryer. - Page 20 To prevent fabric damage, check that laundry will not be caught in the closed door. ^ Close the door with a firm swing - do not push it shut.
- Page 21 ^ Press "START". The "Anti-crease / End" indicator will light. ^ Turn the program selector to "End". ^ Press the button of the drying option ^ Press "Door" and remove the laundry. you would like to select. ^ Clean the lint filter.
- Page 22 Wool and wool blend fabrics Take items out immediately after the end of the program while still slightly damp. Allow items to air dry. Program for reducing creasing cotton, linen or permanent press fabrics made of cotton, blends or synthetics.
- Page 23 In the event of a problem which you cannot fix yourself, or to order spare The indicator marked PC allows a parts please contact: technician to update the dryer to make – Your Miele Dealer use of new technology. For example, if new programs or fabrics are developed, a service technician will –...
-
Page 25: Installation Instructions
INSTALLATION INSTRUCTIONS... - Page 26 1-800-565-6435 with a cord having an equipment service@miele.ca grounding conductor and a grounding plug. The plug must be inserted into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances. WARNING – Improper connection...
- Page 27 Before discarding an old plastic wrappings, bags etc. are appliance, unplug it from the outlet and disposed of safely and kept out of the cut off its power cord and remove any reach of children. doors to prevent hazards.
- Page 28 The tumble dryer can also be placed on top of a Miele washing machine for a stacked installation. An appropriate stacking kit is required. The stacking kit, part # 12 996 026, is available from your Miele dealer or the Miele Technical Service Department.
- Page 29 Avoid ducting in tight corners. – Use flexible metal pipe or rigid metal pipe for venting. Non-metallic flexible hose should not be used since it is a potential fire hazard. – The shorter the exhaust ductwork, the more efficient the dryer will be.
- Page 30 Drying times and energy consumption with flap or remain unaltered for 4" (100 mm) duct window vent kit up to a total length of 66 ft. (20 m). Longer ducts may lead to slight Exhaust 193" 490.2 connection increases, but, the function will not be...
- Page 31 Vent connection left ..39" (1.0 m) Length (L)....47" (1.2 m) Lower radius (R)..19" (0.5 m) Height (H).
- Page 32 2. Wall vent duct 3. Adapter 4. Louvred wall vent 5. Flap 1. Wall pipe 6. Screw 2. Flexible foam gasket A flexible foam gasket must be used if the tumble dryer is directly connected to the wall vent. " 10.8 4" "...
- Page 33 ^ Attach the ducting to the vent. Connection of the rigid metal pipe to the dryer (side view). ^ Move the dryer close to its final position. ^ Attach the ducting to the exhaust port via the duct adapter, securing with duct tape or a hose clamp.
- Page 34 ^ Press the retaining clip of the cap covering the left exhaust port upwards, turn it counterclockwise. ^ Secure the connector into the side port by pressing it in and turning it clockwise. ^ Seal the rear exhaust port with the cap.
-
Page 35: Electrical Connection
The dryer comes with a 5 ft long, 12/4 GROUNDING INSTRUCTIONS AWG cord and a NEMA 14-30 P plug. This appliance must be grounded. In the event of malfunction or It should be connected to a breakdown, grounding will reduce... - Page 40 All rights reserved / 3304 M.-Nr. 05 658 821 / 04 This bio-friendly paper was bleached without the use of chlorine.