Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Miele Manuals
  4. Dryer
  5. T 1576
  6. Operating instructions manual

Miele NOVOTRONIC T 1576 Operating Instructions Manual

Vented dryer
Hide thumbs Also See for NOVOTRONIC T 1576:

Advertisement

Quick Links

See also: Technical Information

Operating Instructions

Vented Dryer
T 1576
V
To prevent accidents
and machine damage
read these instructions
installation or use.
M.-Nr.
05 686 571

Advertisement

loading

Related Manuals for Miele NOVOTRONIC T 1576

Summary of Contents for Miele NOVOTRONIC T 1576

  • Page 1: Operating Instructions

    Operating Instructions Vented Dryer T 1576 To prevent accidents and machine damage read these instructions installation or use. M.-Nr. 05 686 571...
  • Page 3 Contents ..........Center pages .
  • Page 4 WARNING - To reduce the risk of fire, electric shock, or injury to per- sons when using your appliance, fol- low basic precautions, including the following: Read all instructions before using the appliance. Do not dry articles that have been previously cleaned, washed, soaked in, or spotted with gasoline, dry-cleaning solvents, or other flamma-...
  • Page 5 GROUNDING INSTRUCTIONS This appliance must be grounded. In the event of malfunction or break- down, grounding will reduce the risk of electric shock by providing a path of least resistance for electric current. This appliance is equipped with a cord hav- ing an equipment-grounding conductor and a grounding plug.
  • Page 6 Power cord with plug Control panel Door Exhaust connection (left or rear) Four height adjustable screw feet...
  • Page 7 Turns the machine on and off or can- cels a program. If the dryer is turned on the drum interior will light when the door is opened. Opens the door or can be used to can- cel a program. Begins the selected program. The indicator: –...
  • Page 8 The appliance must be correctly in- stalled and connected before the first use. Please see the "Installation instructions". ^ Check the dryer drum for any residue that may have deposited during the manufacturing process. If necessary clean out with a cloth. Before drying, check fabric care la- bels for special drying instructions.
  • Page 9 ^ Press the "On/Off" button to turn on the dryer. ^ Press the "Door" button to open the door. ^ Load the laundry loosely into the drum. ^ Close the door with a firm swing - do not push it shut. Do not use fabric softener sheets in this dryer.
  • Page 10 ^ Turn the program selector clockwise or counterclockwise to the desired program. Please refer to the "Programs" chart.
  • Page 11 For drying laundry that will be stored away, such as linens or seasonal clothing. Uniform loads of cotton e.g. sheets, underwear, socks. Knitted cotton fabrics that may shrink, e.g. jersey material or lightweight cottons. Cotton or linen fabrics to be left damp for easier ironing.
  • Page 12 ^ Select the option before starting a program by pressing the respective button. Indicator light: on = dry option selected. off = dry option not selected. Some drying options are not available in all programs. The dryer will not allow you to choose an option that will conflict with the selected program.
  • Page 13 ^ Press the "START" button. The "Anti-crease/End" indicator will light at the end of a program. ^ Turn the program selector to "End". ^ Press the "Door" button to open the door. ^ Remove the laundry. ^ Check that the drum is empty. ^ Clean the lint filter after each use (see "Cleaning and care".) ^ Press the "On/Off"...
  • Page 14 Once a drying program has started, changes to the program and any se- lected drying options can only be made by cancelling the current program. ^ Turn the program selector to "End". When the program has been canceled the "Anti-crease/End" indicator lights. ^ Turn the program selector either clockwise or counterclockwise to the new program.
  • Page 15 When activated, the safety lock pre- vents the dryer from being operated by locking the control panel functions. 1. Close the door and turn the program selector to "End". 2. Turn on the dryer using the "On/Off" button. 3. Press and hold the "Turbo" button while performing steps 4.
  • Page 16 The lint filter must be cleaned before or after every program. ^ Open the door and remove the lint fil- ter. ^ Wipe the lint off the filter with your hand (do not use any sharp objects!) ^ Any lint remaining in the hollow part of the door can be removed through the gap at the bottom with a dust brush or vacuum.
  • Page 17 (see illustration.) ^ Replace the light bulb with a temper- ature proof bulb (part # 02 150 900) available from Miele’s Technical Ser- vice Department. The light bulb must not exceed the maximum wattage quoted on the data plate.
  • Page 18 With the following guide, minor problems can be fixed without a service call. If the "On" indicator is lit you may not have selected the program properly. If the "On" indicator is not lit, check that: The air supply is insufficient.

  • Page 19: Quick Guide

    Quick Guide Remove this guide for easy reference Please read all instructions, especially the "Important Safety Instructions", using the dryer.
  • Page 20 ^ Press the "On/Off" button to turn on the dryer. ^ Press the "Door" button to open the door. ^ Load the laundry into the drum. Make sure that there is enough space in the drum for clothes to tumble freely. To prevent fabric damage, check that laundry will not be caught in the closed door.
  • Page 21 ^ Press "START". The "Anti-crease / End" indicator will light. ^ Turn the program selector to "End". ^ Press the button of the drying option ^ Press "Door" and remove the laundry. you would like to select. ^ Clean the lint filter. ^ Press the "On/Off"...
  • Page 22 Multi-layer fabrics, mixed loads of sturdy cottons, e.g. jeans, towels. Uniform loads of cotton e.g. sheets, underwear, socks. Knitted cotton fabrics that may shrink, e.g. jersey material or lightweight cottons. Cotton or linen fabrics to be left damp for ironing. Cotton or linen fabrics, which will be ironed with a rotary iron.
  • Page 23 – Select and start the program. – If the indicator still flashes, there is a tech- nical fault. Call the Miele Technical Service Department. – Install the dryer in a warmer room. Single items should be dried with a "Timed cycle"...
  • Page 24 In the event of a problem which you cannot fix yourself, or to order spare parts please contact: – Your Miele Dealer – The Miele Technical Service Department 1-800-999-1360 techserv@mieleusa.com 1-800-565-6435 service@miele.ca When contacting the Technical Service Department, please quote the model and serial number of your appliance.

  • Page 25: Installation Instructions

    INSTALLATION INSTRUCTIONS To prevent accidents and machine damage read these instructions installation or use.
  • Page 26 Contents Disposal of the packing materials ........24 Disposal of an old appliance .
  • Page 27 Installation, repair and mainte- nance work should be by a Miele authorized service technician. Work by unqualified persons could be danger- ous and could void the warranty. Before installation, disconnect the tumble dryer from the electrical supply by unplugging the power cord or tripping the circuit breaker.
  • Page 28 The cardboard box and packing materi- als protect the appliance during ship- ping. They have been designed to be biodegradable and recyclable. Ensure that any plastic wrappings, bags etc. are disposed of safely and kept out of the reach of children. Dan- ger of suffocation! Please recycle.
  • Page 29 The tumble dryer can also be placed on top of a Miele washing machine for a stacked installation. An appropriate stacking kit is required. The stacking kit, part # 12 996 026, is available from your Miele dealer or the Miele Technical Service Department.
  • Page 30 For best drying results, avoid extra long ducting with too many bends or angles. Avoid ducting in tight corners. Use flexible metal pipe or rigid metal pipe for venting. Non-metallic flexible hose should not be used since it is a potential fire hazard.
  • Page 31 The overall duct length will determine the duct diameter. ^ Measure the actual duct length needed: 1. Establish the number of elbows or bends necessary, noting the type of bend, angle and radius involved (see, Table 1). 2. Add the additional duct length as specified in Table 1 to the actual duct length to get the effective duct length.
  • Page 32 Flexible metal ducting has been used for the following example. Other duct types may require additional duct length (see Table 1.) Vent connection left ..39" (1.0 m) Length (L)....47" (1.2 m) Lower radius (R).
  • Page 33 1. Louvred wall vent frame 2. Wall vent duct 3. Adapter 4. Louvred wall vent 5. Flap 6. Screw 1. Wall pipe 2. Flexible foam gasket A flexible foam gasket must be used if the tumble dryer is directly connected to the wall vent.
  • Page 34 Connection of the rigid metal pipe to the dryer (side view). 1. KA-pipe 2. Adapter Height of vent adapter in a stacked in- stallation. ^ Attach the ducting to the vent. ^ Move the dryer close to its final posi- tion.
  • Page 35 ^ Remove the vent socket from the rear exhaust port by inserting a thin screwdriver into the slot by the retain- ing clip. Press the clip gently up- wards and at the same time turn the connector counterclockwise. ^ Press the retaining clip of the cap covering the left exhaust port up- wards, turn it counterclockwise.

  • Page 36: Electrical Connection

    Installation Kit", which allows you to use that line to connect this appliance. This dual receptacle, wall mounted connection box can connecting a Miele 1900 series clothes washer and 1500 series clothes dryer to an existing 30 Amp (NEMA 10-30R) outlet.
  • Page 40 All rights reserved/4503 M.-Nr. 05 686 571 / These instructions printed on 100% unbleached, recycled paper are completely biodegradable.